Nikon A1 Instruction Manual Download Page 11

Page: 11 / 88

Chapter 3. Operation of the Microscope

3.6

Perfect Focus System Operation

(with the Front Operation Panel)

(1) Check that the dichroic mirror IN/OUT lever is

set to IN.

(2) Set the objective to be used in the optical path

and adjust the focus with the focus knob on

the microscope to focus on the sample.

(3) Press the PFS-ON button on the front

operation panel.

(When the PFS starts, the PFS-ON indicator

lights green.)

OUT

DICHROIC MIRROR

Dichroic mirror IN/OUT lever

(4) Focus on the position at which focus is maintained with the offset dial on the PFS offset controller and

start microscopy.

Once the PFS operation is started, focusing with the focus knob on the microscope is disabled.

Registering offset amount: The focus position adjusted with the offset dial can be registered with the

PFS-MEMORY button.

Recalling offset amount:

Registered focus position can be called with the PFS-RECALL button.

L80

EYE

DISPLAY

MEMORY

PFS

RECALL

Z-RESET

BRIGHTNESS

R100

L100

FOCUS

1.5X

PFS

DOWN

PFS

OFFSET

CONTROLLER

FINE

COARSE

Figure Ti-E Front Operation Panel and Offset Controller

PFS-ON
button/indicator

PFS-MEMORY
button/indicator

PFS-RECALL
button/indicator

FINE/COARSE selector
button

Summary of Contents for A1

























































































Search results

Summary of Contents for A1

Reviews:

Nikon A1, Instruction Manual, Page: 11 / 88

Search results

Summary of Contents for A1

Reviews: