50
The DVR supports access from mobile devices such as iPhone, iPad and the increasingly popular
Android operating system. To correctly configure your DVR for remote access via a mobile device, or
indeed any remote access, it is important to have your network and Internet connection configured
correctly. Typically, this is matter of forwarding ports from your router to specific devices (in this case,
your DVR).
Requirements
To access the DVR via a mobile device, the following conditions must be met:
•
A high-speed Internet connection with an upload speed in excess of 256 kbps (ideally above 512
kbps).
•
The DVR attached to this high-speed Internet connection.
•
Your home network correctly configured to allow the DVR’s SERVER PORT unrestricted access
to the Internet. Typically, this requires enabling UPnP (recommended) or forwarding ports (not
recommended).
•
A compatible mobile device with a supported platform (see below).
•
The correct application(s) installed on your mobile device.
•
A sufficient signal to your mobile device (areas with intermittent coverage or low signal strength
will adversely affect the playback).
Setting up the DVR for Mobile Access
1. Enter the
Main Menu
.
2. Navigate to
Net Service
, and locate the field titled
Mobile Port
.
3. Ensure that the value listed is unique on your network, and make a note of it. The default value is
34599
. Note: that, if UPnP is not enabled, this port will need to be properly forwarded from your router
to ensure that it can be accessed remotely.
4. The
PASSWORD
for mobile access is the same as the
admin
account password.
Note: If you want to access the DVR via a mobile device, then you’ll need to use the
admin
and
password to access it. We strongly advise setting password on the admin account to prevent
unauthorized remote access.
Preparing App in your Mobile Device
Download
vMEye V2
(Smartphone App, the old version is vMeye) from iTunes (for iPhone) or Google
Play Store (for Android operating system),or copy from CD enclosed to mobile devices and install it.
vMEye V2
(App)
1. Inetall the app in the mobile device(copy the software “ vmeyev2.apk” from CD, or download from
Play store and iTunes).
2. Add device in the app: Device Name, IP Address, Mobile Port, User Name and Password(the
User Name and Password is same as the DVR login), select the Max Channel.
3. Back to view the image and make other operations.
Remote Access from Mobile Devices
Summary of Contents for 4 channel D1 Realtime DVR
Page 1: ......
Page 19: ...18 Record Advanced Alarm Info System Logout Main Menu...
