3
CE, FCC, RoHS Verification
NOTE:
This equipment has been tested and found to comply with the limits for the CE, FCC, RoHS
rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna
* Increase the separation between the equipment and the receiver
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
* Consult the dealer or an experienced radio/TV technician for help
These devices comply with the CE Rules. Operation is subject to the following two conditions:
1. These devices may not cause harmful interference, and
2. These devices must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any
camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras and to comply with the applicable laws and
regulations.
CE Regulation: Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under lawful authority, no person
shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the
purpose of overhearing or recording the private conversations of others unless such use is authorized
by all of the parties engaging in the conversation.
WARNING
Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
* Make sure product is fixed correctly and stable if fastened in place
* Do not operate if wires and terminals are exposed
* Do not cover vents on the side or back of the DVR and allow adequate space for ventilation
DEFAULT PASSWORD INFORMATION
To ensure your privacy, this DVR supports password protection.
*
The default, all-access username is “admin”.
If the DVR asks you to log in before you’ve set a
password, enter
admin
as your username and leave the password blank. This will give you access to
all areas of the DVR.
* There is no “default” password - until you set a password and enable password protection, the
DVR will not ask you for one.
* To ensure your ongoing privacy,
we strongly recommend setting a password as soon as
possible.
Choose something that you’ll remember, but that others would be unlikely to guess.
* If you do manage to lock yourself out of the DVR, you’ll need to contact us at the NightWatcher
Technical Support Telephone Helpdesk - the number is on the back cover.
Before you begin
Summary of Contents for 4 channel D1 Realtime DVR
Page 1: ......
Page 19: ...18 Record Advanced Alarm Info System Logout Main Menu...
