Smart Halter
™
User Guide
Using Your Device
June 2020
Models: NW-1000 and NWC-2000
Page 14 of 38
Using Your Device
Powering/Charging Your Device
Your NIGHTWATCH
®
smart halter
™
is powered by three rechargeable and safety-certified lithium-polymer
batteries (2,400 mAh) offering ~12 hours of use before it requires recharging. Be sure to fully charge your device
before using it for the first time. Your device’s battery power % can
be viewed in the NIGHTWATCH
®
App.
CAUTION
•
Never
charge your device on a horse;
always
remove from your horse before charging.
To turn your device ON:
1.
Press and hold the power button for ~2 seconds and release when
white
LED appears.
•
LED will blink
white
rapidly for ~1 minute while device is starting up and initializing.
•
LED will blink
white
1x every ~10 seconds when in standby mode. After ~5 minutes device will
enter active mode:
−
LED will blink
white
3x every ~10 seconds when alerts are disabled.
−
LED will blink
green
1x every ~10 seconds when alerts are enabled (no alerts).
−
LED will remain
red
when alerts are enabled (alert issued; threshold breached).
NOTE
: Your device will remain in standby mode for 5 minutes when your device is powered on and when
removed from charger to limit false positive alerts and erroneous presentation of artifact data in the App.
To turn your device OFF:
1.
Press and hold the power button for ~5 seconds and release when
white
LED turns off.
•
If the LED turns
blue
, your device has entered Broadcast Mode. To exit Broadcast Mode, restart
your device.
To charge your device:
1.
Remove device from your horse.
2.
Attach charger to the magnetic charging port on the ID plate located on the crown.
3.
Plug charger into USB adapter and into AC outlet and look for blinking
green
LED.
•
LED will blink
green
while charging.
•
LED will blink
green
3x every ~10 seconds when fully charged.
•
LED will blink
green
rapidly if your device has a critically low battery.
•
LED will not illuminate if your device battery is at 0%, so turn your device ON while charging.
The LED on your NIGHTWATCH
®
smart halter
™
provides you with a visual indication of both your horse and
device status (refer to
).
