Smart Halter
™
User Guide
Setting Up Your Device
June 2020
Models: NW-1000 and NWC-2000
Page 13 of 38
2.
Once your device is connected to a smartphone or computer:
a.
Open a web browser on your connected smartphone or computer and enter
connect.smarthalter.com
or
192.168.44.1
b.
Select “
Setup WiFi.
”
c.
Select your preferred WiFi network
from list of available networks and enter that network’s
passphrase/password.
NOTE:
Refresh your list if you do not see your desired network.
d.
Restart your device
once successfully connected to your WiFi network.
2a.
2b.
2c.
2d.
NOTE
: You
must
restart
your device to complete this step and exit Broadcast Mode. Device will automatically
exit Broadcast Mode after 30 minutes of being off the charger.
Your NIGHTWATCH
®
smart halter
™
will remember all WiFi networks to which you connect it. However, you may
need to periodically update or change the network to which it was last connected. To connect to another
network, place your device in Broadcast Mode (refer to
) and follow steps for Option 1 or 2.
