Smart Halter
™
User Guide
Setting Up Your Device
June 2020
Models: NW-1000 and NWC-2000
Page 11 of 38
Option 1: Connect via the NIGHTWATCH
®
App
If the blue LED on your device is blinking 3x every ~10 seconds, then proceed with the following. Otherwise,
connect via option 2 by associating your device to a nearby smartphone or computer and connect manually.
To connect to WiFi:
1.
Select a horse with an assigned device (or select an unassigned device) from home screen.
2.
Click on
your device’s serial # in the header.
3.
Select
“
WiFi Setup.
”
4.
Select
“
Next
”
when the blue LED on your device blinks 3x every ~10 seconds while in Broadcast Mode.
5.
Select
“
Next
”
when you receive confirmation that your device has sufficient cellular connectivity to
proceed.
NOTE
: This step
may take up to 5 minutes during which you will see the processing “
“ icon.
6.
Select a WiFi network and enter the network password
before selecting “Connect.”
NOTE
: You may
need to select “Refresh” for your desired network to appear
; this step may take up to 5 minutes during
which you will see the processing “ “.
7.
Select
“Close” to complete connection and then
restart your device
to exit Broadcast Mode
8.
Confirm your device is connected to WiFi on Summary (8a) and Home pages (8b).
1.
2.
3.
4.
5.
6.
