Nieco 940 Gas, Owner'S Manual

Page: 10 / 28

10
1. Main Gas Valve controls gas input
to equipment.
2. Main Gas Solenoid Valve opens
when broiler main switch is turned
on. Valve closes automatically if
there is a power failure shutting off
gas supply to broiler.
1. Turn on MAIN POWER
switch.
2. Turn on MOTOR POWER
switch.
3. Set MOTOR SPEED control
to desired cooking speed.
(Use a setting of ‘50’ to start.)
4. Turn on BUN PLATEN
THERMOSTAT and set to
desired temperature.
(Use a setting of 450° F to
start.)
OPERATING PROCEDURE
In the following section, a brief step-by step sequence of lighting and operating procedures is given. For
reference, a condensed lighting procedure is located on top of the control box.
Before starting broiler, ensure that all parts are correctly installed, all controls are off, and the ventilation hood is
turned on.
Do not attempt to operate this appliance in the event of a power failure.
CAUTION: Meat stripper blade can cause patty belt damage if incorrectly installed. If relighting
broiler, avoid touching heated surfaces.
STEP-BY-STEP PROCEDURE