
11
5. Remove broiler’s RIGHT SIDE
PANEL so you will have access to
pilot light ignition holes. NOTE: This
may not be necessary if your broiler
is equipped with electric PILOT
IGNITOR.
6. Turn on MAIN GAS VALVE located
on lower right side of broiler. See
ATC instructions if applicable.
7A. Light LOWER PILOT BURNER by
pressing lower red button (see 7A).
Hold flame to pilot ignition hole (see
7B). Or press PILOT IGNITION
button on models so equipped. (See
7C.) After pilot ignites, hold button in
for about 20 seconds to insure pilot
will remain ignited.
8. Repeat above procedure with
UPPER PILOT BUTTON and UPPER
IGNITION HOLE.
9. Refer to ATC calibration instructions.
Summary of Contents for 940 Gas
