Nieco 940 Gas, Owner'S Manual

Page: 17 / 28

17
E. ASSEMBLY/DISASSEMBLY & CLEANING
MODEL 940/960
In the following section a brief step-by-
step sequence of the procedures for
broiler disassembly and cleaning is
given. For additional information or
repair, contact your Nieco authorized
distributor.
If a flexible gas line, quick disconnect
coupling and restraining device are
used (see installation section for cor-
rect type and installation) to connect
the broiler to the gas supply, any time
the restraining device is disconnected
it must be reconnected after moving
the broiler back to its originally
installed position, and the casters
locked before operation of the broiler.
1. Turn the machine off (all electrical
power switches, including MAIN
POWER and the gas); wait until
the machine is cool before
attempting to disassemble or
clean.
2. Remove SIDE PANELS by lifting
up and out; clean daily with soap
and water.
3. Remove HOOD END FLAP by
lifting up and out; clean daily with
soap and water.
4. Remove TOP HOOD by lifting up;
clean daily with soap and water.