52
Rev
001
7.22 How do I automatically make multiple images?
The camera can be set to make multiple images based on a time delay or an
alarm overrun. It can be set when an image must be created and how often it
should be repeated. This option can be used for viewing a temperature curve
over a longer period. Or as detection of the time a temperature alarm occurred.
Making multiple images
1. Press hotkey 4
to select the menu (Fig. 1)
2. Use the left/right navigation buttons
to move to the Camera Settings
(See Fig 2) and press Hotkey 3
to select it.
3. Use the up/down navigation buttons
to move to the “Sequence record” option.
(Fig 3)
4. Use the left/right navigation buttons
to toggle between: 10 sec, 20 sec, 30
sec, 1min, 2min, 5 min, 10 min, 20 min, 30 min, 1 hour, Alarm.
5. Use the up/down navigation buttons
to select “Sequence Captures”
option. (Fig. 4)
6. Use the left/right navigation buttons
to toggle between: 10, 50, 100, 500,
of 1000.
7. Press hotkey 4
to exit menu.
8. If an image is made with the camera now, the abovementioned series of
images will be started.
Fig
2
Fig
3
Fig
4
Hotkey 1 Hotkey 2 Hotkey 3 Hotkey 4
Fig 1.
Centre toggle button
Up/Down, Left/Right
navigation buttons.
