43
Rev
001
7.14 How do I set alarms?
Fig.
2 Fig.
3
Fig.
4
Setting
alarms
1. Press Hotkey 4
to select menu (Fig 1).
2. Use the left/right navigation buttons
to move the Measurement menu
and Press Hotkey 3
to select it (Fig 2).
3. Use the up/down navigation buttons
to move to the temperature alarm
option (see Fig 3).
4. Use the left/right navigation buttons
to toggle through “Off”, “High”, “Low”
or “High & Low”. (In the example below we will select a high alarm).
5. Press Hotkey 4
to exit.
6. Use Hotkey 1
to toggle through until the high alarm icon appears
(Fig 4).
7. Use the up/down navigation buttons
to select a higher limit temperature.
8. If the temperature at the cursor or within the measurement box is above the
upper limit value a message “Over Limit” will flash at the bottom of the screen.
Hotkey 1 Hotkey 2 Hotkey 3 Hotkey 4
Fig 1.
Centre toggle button
Up/Down, Left/Right
navigation buttons.
