18
Rev
001
•
Temperature profile
Select “Horizontal” or “Vertical” to enable a histogram of
temperature values along a horizontal or vertical cross section to be
displayed on the right hand side of the display. The position of the
cross section is indicated by small arrows at the left and right or top and
bottom of the image and can be adjusted by means of Hotkey 1 and the
navigation buttons.
•
Temperature alarms
Select “High”, “Low”, or “High & Low”. Visual and audio
alarms will be triggered if either cursor or a point within the designated
area is higher or lower than a set temperature. The high and low set
temperatures may be adjusted by means of Hotkey 1 and the
navigation buttons.
4.3.4 Camera settings
See chapter “frequently asked questions” for more details.
•
LCD brightness
Select from 1 (low) to 9 (high) to control the screen brightness to save
battery power.
•
Caption mode
Select “On” to enable the addition of a text caption when saving an image.
Options will then be displayed when saving an image, to be selected by
means of Hotkey 2 and hotkey 3.
•
Auto off
Select “5 Mins”, “10 Mins”, “20 Mins” to allow the camera to switch itself off
after a defined period of inactivity in order to save power. There is also an
“Always On” option.
