Nidek Medical RT-5100 Operator'S Manual Download Page 155

Page: 155 / 306

137

ADVANCED FEATURES

Parameter Settings

Standard accommodation power display (only for Plus Package): Morgan, Hofstetter, No

Factory setting: No
Setting for the standard accommodation power to be displayed in the # 19 Near point of accommoda-

tion (NPA) window and the #19 Accommodation with addition of minus lens window.
Morgan



Displays the range of Morgan’s criterion

Hofstetter



Displays the maximum value, average value, and minimum value calculated by the

Hofstetter formula



Criterion is not displayed.

Acomm. power for Range of Clear Vision: ADD/NPA/Age/Manual

Factory setting: Age
Setting for selecting which value is used for the accommodation power for the range of clear vision cal-

culation.

Near indication link (Range of Clear Vision): Yes, No

Factory setting: Yes
Setting for whether or not to switch the far / near indication automatically along with the lens type when

the lens type is changed with the data window displayed during the test for range of clear vision.

AC/A for Sheard/Percival SPH (only for Plus Package): Gradient AC/A, Heterophoria AC/A

Factory setting: Gradient AC/A
Setting for AC/A used for calculating the SPH adjustment value that satisfies Sheard/Percival’s crite-

rion.

Accomm. for Morgan’s System (only for Plus Package): #19 NPA, #19 (-)lens

Factory setting: #19 NPA
Setting for accommodation used for comparison with Morgan’s criterion.

Prism for Supra. and Infra. (only for Plus Package): R, L

Factory setting: R

Selection of which prism to be changed when in Supravergence test. For R, #12B and #18B result

becomes right supravergence / infravergence test. For L, the result becomes left supravergence /

infravergence test.

After measuring #12B or #18B, the setting cannot be changed.

Graph type (only for Plus Package): Type 1, Type 2

Factory setting: Type 1
Setting for the type of visual function analysis graph display.

Type 1



#20 data is not reflected on the RCI line. #21 data is not reflected to the RCS line.

Type 2



#20 data is reflected on the RCI line. #21 data is reflected to the RCS line.

*For details, see

"5.3.2 Visual function analysis graph" (page 237).

Graph display (only for Plus Package): As - +13.00D, As - +3.0D

Factory setting: As - +13.00D
Setting for the graph display.

161221687130 承認済

Uncontrolled copy when printed.

Summary of Contents for RT-5100



















































































































































































































































































































Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands

Nidek Medical RT-5100, Operator'S Manual

Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands