manualshive.com logo in svg

Nidek Medical RT-5100, Operator'S Manual

Share
Download
Nidek Medical RT-5100 Operator'S Manual Download Page 38

20

BEFORE USE

Labels

1.5

Labels

Cautionary labels are provided on the device.

Indicates that caution must be taken. Refer to the operator's manual before 
use.

Indicates that the operator is advised to refer to the related instructions in the 
operator’s manual.

Indicates that the degree of protection against electric shock is of a Type B 
Applied Part.

* The applied part is the forehead rest (see 10 in “1.4 Configuration” (page 

2)).

Indicates that when the switch is pressed to this symbol side, power is not 
supplied to the device.

Indicates that when the switch is pressed to this symbol side, power is 
supplied to the device.

Indicates that the RT-5100 must be supplied only with alternating current.

Indicates the date of manufacture.

Indicates the manufacturer.

Indicates that this product shall be disposed of in a separate collection of 
electrical and electronic equipment in EU.

161221687130 承認済

Uncontrolled copy when printed.

Summary of Contents for RT-5100



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands