![background image](http://html1.mh-extra.com/html/nidec/shimpo-dt-5tfr/shimpo-dt-5tfr_instruction-manual_1687930016.webp)
16
For both DT-5TXR and DT-5TFR, if you purchase a model with optional equipment, be sure to check its model,
speci
fi
cations, and wiring method for the correct use.
●
Speci
fi
cations
(Commonly Used for DOP-FVTR and DOP-FVC)
* The user must perform cable connection (only for DOP-FVC).
●
Wiring
DOP-FVTR (Terminal block connection)
㻯㻗
㻯㻙
㼂㻝㻙
㻠㻌㼠㼛㻌㻞㻜㼙㻭
㻗
㻙
㼂㻝㻜㻗
㼂㻝㻜㻗
㼂㻡㻗
㼂㻡㻙
㼂㻝㻗
㻜㻌㼠㼛㻌㻝㻜㼂
㻗
㻙
㻝㻌㼠㼛㻌㻡㼂
㻗
㻙
㻜㻌㼠㼛㻌㻝㼂
㻗
㻙
* Use one output among these.
DOP-FVC (Connector connection)
* Use one output among these.
Caution
In case of assembling the
fi
rst option to DT-5TXR
unit body after purchasing,
please note that only the options with “R” at the
foot of model name can be connected to the unit.
Please refer “Function”in the Instruction Manual of Digital
Tachometer or Ratio meter at same time.
●
Setting(For DOP-FVTR/DOP-FVC)
࣭
When DOP-FVTR or FVC is installed,the following function
shall be available.
* Digital ratio meter is only available to install DOP-FVC.
No offset (F14=0.0%)
Offset is used (F14=20.0%)
[Setting example 1]
Number of pulse is one per revolution.When display value is
46.8m/min at 1200rpm,analog output signal is 10V.Minimum out-
put signal is 0V and update time is same as display cycle.
* Other Parameter and Functions shall be initial value.
[Setting example 2]
Number of pulses are sixty per revolution.When display value
is 200m/min at 1000rpm,analog output signalis 10V.At 40m/
min,analog output signal is 0V.Update time is fastest as 10msec.
࣭
step 1 : On the chart,pull the line between 0V at 40m/min and
10V at 200m/min.
࣭
step 2 : Pull the parallel line against above line.
Calculate the speed(A=F11)at 10V.
A=200-40=160m/min
࣭
step 3 : Calculate offset voltage(B) at 30m/min.
B=-40÷160×10=-2.5V
࣭
step 4 : Calculate B value as %(C).
C=-2.5÷10×100=-25.0%
* Other Parameters and Functions shall be initial value.
* Below 40m/min,output signal shall be negative.
㼇㻿㼑㼠㼠㼕㼚㼓㻌㼑㼤㼍㼙㼜㼘㼑㻌㻟㼉
N u m b e r o f p u l s e s i s o n e
per revolution.When elapse
time(display value) is 0:15:30
at 250rpm,analog output signal
is 20mA.Update time is the
same as display cycle.
* Other Parameters and Functions shall be initial value.
Optional Equipment (Commonly Used for DT-5TXR/ DT-5TFR)
㻹㼛㼐㼑㼘
㻰㻻㻼㻙㻲㼂㼀㻾㻛㻰㻻㻼㻙㻲㼂㻯
㻻㼡㼠㼜㼡㼠
㻯㼡㼞㼞㼑㼚㼠㻌㼛㼡㼠㼜㼡㼠 㻠㻌㼠㼛㻌㻞㻜㼙㻭
㻻㼚㼘㼥㻌㼛㼚㼑㻌㼛㼡㼠㼜㼡㼠㻌㼏㼍㼚㻌㼎㼑
㼡㼟㼑㼐㻌㼍㼙㼛㼚㼓㻌㼠㼔㼑㼟㼑㻌㼠㼔㼞㼑㼑㻚
㼂㼛㼘㼠㼍㼓㼑㻌㼛㼡㼠㼜㼡㼠
㻜㻌㼠㼛㻌㻝㻜㼂
㼼 㻝㻜㼂㻌㼣㼔㼑㼚㻌㼐㼕㼟㼜㼘㼍㼥㼕㼚㼓㻌䇾㻙䇿
㼛㼚㻌㼠㼔㼑㻌㼞㼍㼠㼕㼛㻌㼙㼑㼠㼑㼞㻚
㻝㻌㼠㼛㻌㻡㼂
㻜㻌㼠㼛㻌㻝㼂
㼼 㻝㼂㻌㼣㼔㼑㼚㻌㼐㼕㼟㼜㼘㼍㼥㼕㼚㼓㻌䇾㻙䇿
㼛㼚㻌㼠㼔㼑㻌㼞㼍㼠㼕㼛㻌㼙㼑㼠㼑㼞㻚
㻸㼛㼍㼐
㻯㼡㼞㼞㼑㼚㼠㻌㼛㼡㼠㼜㼡㼠 㻡㻜㻜 䃈㻌㼛㼞㻌㼘㼑㼟㼟
㼂㼛㼘㼠㼍㼓㼑㻌㼛㼡㼠㼜㼡㼠 㻝㼗 䃈㻌㼛㼞㻌㼘㼑㼟㼟
㻯㼛㼚㼚㼑㼏㼠㼛㼞㻌㼡㼟㼑㼐㻌㻌㻌㻌㻌㻌㻌
㻔㻰㻻㻼㻙㻲㼂㻯㻕
㼇㻻㼚㻌㻰㼀㻙㻡㼀㼄㻾㻛㻰㼀㻙㻡㼀㻲㻾㻌㼟㼕㼐㼑㼉㻌㻼㻯㻿㻙㻱㻟㻢㻸㻹㻰
㼇㻻㼚㻌㼠㼔㼑㻌㼜㼘㼡㼓㻌㼟㼕㼐㼑㼉㻌㻼㼘㼡㼓㻦㻌㻼㻯㻿㻙㻱㻟㻢㻿㻲㻘㻯㼛㼢㼑㼞㻦㻌㻼㻯㻿㻙㻱㻟㻢㻸㻭
㻔㼎㼛㼠㼔㻌㼙㼍㼚㼡㼒㼍㼏㼠㼡㼞㼑㼐㻌㼎㼥㻌㻴㼛㼚㼐㼍㻌㻯㼛㼙㼙㼡㼚㼕㼏㼍㼠㼕㼛㼚㻕
㻲㼡㼚㼏㼠㼕㼛㼚
㻺㼛㻚
㻿㼑㼠㼠㼕㼚㼓㻌㼕㼠㼑㼙
㻱㼤㼜㼘㼍㼚㼍㼠㼕㼛㼚
㻲㻝㻝
㻰㼕㼟㼜㼘㼍㼥㻌㼢㼍㼘㼡㼑㻌㼍㼠
㻹㼍㼤㼕㼙㼡㼙㻌㻭㼚㼍㼘㼛㼓
㻿㼑㼠㼠㼕㼚㼓㻌 㼐㼕㼟㼜㼘㼍㼥㻌 㼢㼍㼘㼡㼑㻌 㼒㼛㼞㻌 㼠㼔㼑㻌 㼙㼍㼤㼕㼙㼡㼙㻌 㼢㼍㼘㼡㼑㻌
㼛㼒㻌㼑㼍㼏㼔㻌㼛㼡㼠㼜㼡㼠㻌㼟㼕㼓㼚㼍㼘㻌㻔㻝㻜㼂㻘㻌㻡㼂㻘㻌㻝㼂㻌㻒㻌㻞㻜㼙㻭㻕㻚
㻲㻝㻞
㻰㼕㼟㼜㼘㼍㼥㻌㼢㼍㼘㼡㼑㻌㼍㼠
㻹㼕㼚㼕㼙㼡㼙㻌㻭㼚㼍㼘㼛㼓㻌㼛㼡㼠㼜㼡㼠
㻮㼑㼘㼛㼣㻌 㼠㼔㼕㼟㻌 㼐㼕㼟㼜㼘㼍㼥㻌 㼢㼍㼘㼡㼑㻘㻌 㼑㼍㼏㼔㻌 㼛㼡㼠㼜㼡㼠㻌 㼟㼔㼍㼘㼘㻌
㼏㼘㼕㼜㻌㼠㼛㻌㼙㼕㼚㼕㼙㼡㼙㻌㼢㼍㼘㼡㼑㻌㻔㻜㼂㻘㻌㻝㼂㻌㻒㻌㻠㼙㻭㻕㻚
㻺㼛㼞㼙㼍㼘㼘㼥㻌㼆㼑㼞㼛㻌䇾㻜䇿䚷㼕㼟㻌㼟㼑㼘㼑㼏㼠㼑㼐㻚
㻲㻝㻟
㼁㼜㼐㼍㼠㼑㻌㼠㼕㼙㼑㻌㼛㼒㻌
㻭㼚㼍㼘㼛㼓㻌㼛㼡㼠㼜㼡㼠㻌㼟㼕㼓㼚㼍㼘
㻿㼑㼠㼠㼕㼚㼓㻌䇾㻜䇿㻌㻦㻲㼍㼟㼠㼑㼟㼠㻌㻔㻼㼞㼛㼤㻚㻌㻝㻜㼙㼟㼑㼏㻕㻘
㻿㼑㼠㼠㼕㼚㼓 䇾㻝䇿 㻦㻿㼍㼙㼑㻌㼍㼟㻌㼐㼕㼟㼜㼘㼍㼥㻌㼏㼥㼏㼘㼑
㻲㻝㻠
㻻㼒㼒㼟㼑㼠㻌㼛㼒㻌
㻭㼚㼍㼘㼛㼓㻌㼛㼡㼠㼜㼡㼠㻌㼟㼕㼓㼚㼍㼘
㼀㼔㼑㻌㼢㼍㼘㼡㼑㻌㼟㼍㼠㼑㼐㻌㼎㼥㻌䠂㻌㼛㼒㻌㼙㼍㼤㼕㼙㼡㼙㻌㼛㼡㼠㼜㼡㼠
㼟㼕㼓㼚㼍㼘㻌㻔㻝㻜㼂㻘㻌㻝㼂㻕㻌㼍㼟㻌㻝㻜㻜䠂
㻠 䡚 㻞㻜㼙㻭㻦㻝㻢㼙㻭㻌㼕㼟㻌㻝㻜㻜䠂
㻝 䡚 㻡㼂㻌㻦㻠㼂㻌㼕㼟㻌㻝㻜㻜䠂
㻺㼛㼞㼙㼍㼘㼘㼥㻌㼆㼑㼞㼛㻌䇾㻜䇿㻌㼕㼟㻌㼟㼑㼘㼑㼏㼠㼑㼐㻚
㻿㼥㼙㼎㼛㼘
㻼㼕㼚㻌㻺㼡㼙㼎㼑㼞
㻿㼥㼙㼎㼛㼘
㻯㻗
㻠㻌㼠㼛㻌㻞㻜㼙㻭㻗
㻝
㻝㻥
㻯㻙
㻠㻌㼠㼛㻌㻞㻜㼙㻭㻙
㻞
㻞㻜
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻟
㻞㻝
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻠
㻞㻞
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻡
㻞㻟
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻢
㻞㻠
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻣
㻞㻡
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻤
㻞㻢
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㼂㻝㻜㻗
㻜㻌㼠㼛㻌㻝㻜㼂㻗
㻥
㻞㻣
㼂㻝㻜㻙
㻜㻌㼠㼛㻌㻝㻜㼂㻙
㻝㻜
㻞㻤
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻝㻝
㻞㻥
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻝㻞
㻟㻜
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㼂㻡㻗
㻝㻌㼠㼛㻌㻡㼂㻗
㻝㻟
㻟㻝
㼂㻡㻙
㻝㻌㼠㼛㻌㻡㼂㻙
㻝㻠
㻟㻞
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻝㻡
㻟㻟
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㻝㻢
㻟㻠
㻺㼛㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚
㼂㻝㻗
㻜㻌㼠㼛㻌㻝㼂㻗
㻝㻣
㻟㻡
㼂㻝㻙
㻜㻌㼠㼛㻌㻝㼂㻙
㻝㻤
㻟㻢
㻼㼍㼞㼍㼙㼑㼠㼑㼞
㻼㻝
㻼㻞
㻼㻟
㻝㻜㻜
㻞㻜㻜
㻜㻦㻝㻡㻦㻟㻜
㻲㼡㼚㼏㼠㼕㼛㼚
㻲㻝㻝
㻲㻝㻞
㻲㻝㻟
㻲㻝㻠
㻜㻦㻝㻡㻦㻟㻜
㻜
㻝
㻜㻚㻜
㻼㼍㼞㼍㼙㼑㼠㼑㼞
㻼㻝
㻼㻞
㻼㻟
㻝
㻝㻞㻜㻜
㻠㻢㻚㻤
㻼㼍㼞㼍㼙㼑㼠㼑㼞
㻼㻝
㻼㻞
㻼㻟
㻢㻜
㻝㻜㻜㻜
㻞㻜㻜
㻲㼡㼚㼏㼠㼕㼛㼚
㻲㻝㻝
㻲㻝㻞
㻲㻝㻟
㻲㻝㻠
㻠㻢㻚㻤
㻜㻚㻜
㻝
㻜㻚㻜
㻲㼡㼚㼏㼠㼕㼛㼚
㻲㻝㻝
㻲㻝㻞
㻲㻝㻟
㻲㻝㻠
㻝㻢㻜
㻜
㻜
㻙㻞㻡㻚㻜
㻝㼟㼠㻌㼛㼜㼠㼕㼛㼚㻌㻔㼠㼑㼞㼙㼕㼚㼍㼘㻌㼎㼘㼛㼏㼗㻌㼛㼡㼠㼜㼡㼠㻕
㻰㻻㻼㻙㻲㼂㼀㻾
㻭㼚㼍㼘㼛㼓㻌㼟㼕㼓㼚㼍㼘㻌
㻔㼢㼛㼘㼠㼍㼓㼑㻛㼏㼡㼞㼞㼑㼚㼠㻕㻌㼛㼡㼠㼜㼡㼠
㻞㼚㼐㻌㼛㼜㼠㼕㼛㼚㻌㻔㼏㼛㼚㼚㼑㼏㼠㼛㼞㻌㼛㼡㼠㼜㼡㼠㻕
㻰㻻㻼㻙㻲㼂㻯
Summary of Contents for SHIMPO DT-5TFR
Page 20: ......