Nice M3BAR, Instructions And Warnings For Installation And Use

Page: 23 / 48

EN
English – 21
APPENDIX I
To be used only in the case of installations in conformity with chapter 1 and more specifically paragraph 1.3.1
To be detached, compile box N°1 and deliver to automation owner together with the operation manual and maintenance schedule
CE declaration of conformity
Declaration in accordance with Directives: 2004/108/CE (EMC); 1999/5/CE (R&TTE), 2006/42/CE (MD) Appendix II, part A;
89/106/CEE (CPD) procedure according to appendix III, ii, possibility 2 (System 3)
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.a., and particularly the lat-
est version thereof available prior to the printing of this manual. The text contained here has been adapted to meet editorial requirements. A copy of the orig-
inal declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 404/M-LBAR Revision: 0 Language: EN
Name of manufacturer: NICE S.p.A.
Address: Via Pezza Alta 13, Rustignè Industrial Zone, 31046 Oderzo (TV) Italy
Person authorized to
provide technical
documentation:
Mr. Oscar Marchetto
Product type: Electromechanical barrier lift
Model / Type : M3BAR, M5BAR, M7BAR, LBAR
Accessories: XBA14, XBA15, XBA4, XBA6, XBA18, XBA9, XBA7, XBA8
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the product identified above complies with the provisions
of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment of Member States’ legislation
regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the following harmonized standards: EN 61000-6-2:2005, EN
61000-6-3:2007
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive 95/16/EC (consoli-
dated text)
Should the machinery be put into service in a European country with an official language different from the one of this declaration, the importer must attach
the translation of this document to the declaration.
• Directive 89/106/EEC of the European Council of 21 December 1988 regarding the approximation of legislation, regulations and administration of Member
States concerning construction products, according to the following harmonised standards: EN 13241-1:2003
Also conforms to the essential requirements specified in article 3 of the following community directive, for the products’ intended use:
• Directive 1999/5/CE OF THE EUROPEAN PARLIAMENT AND COUNCIL dated March 9 1999 regarding radios and communications terminals and recipro-
cal recognition of their conformity in accordance with the following harmonized standards:
• Protection of health (art. 3(1)(a)): EN 50371:2002
• Electrical safety (art. 3(1)(a)): EN 60950-1:2006+A11:2009
• Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
• Radio spectrum (art. 3(2)): EN 300 330-2 V1.5.1:2010
In accordance with directive 1999/5/CE (annex V), the product is classified as class 1 and marked:
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003, EN 60335-2-103:2003+A11:2009
Oderzo, June 21 2011
Luigi Paro
(Managing Director)
Essential requirements for CE marking
Characteristics Certifying Authority Document
Release of hazardous substances CERT(CPD n°1600) 374/11, 375/11, 376/11, 377/11
Resistance to wind load CERT(CPD n°1600) 374/11, 375/11, 376/11, 377/11
Safe opening for vertically moving doors CERT(CPD n°1600) 374/11, 375/11, 376/11, 377/11
Mechanical strength and stability – 2009_002 SP S14
Manoeuvring forces for power-operated doors/gates CERT(CPD n°1600) 374/11, 375/11, 376/11, 377/11
( * ) CERT of Treviso Tecnologia in Lancenigo di Villorba (Tv)
0682
Box N° 1
The installation of the product: M-LBAR Road Barrier matricola N° serial N° (see label):.....................................................................................................
Complete with pole: XBA4 and following accessories: ..........................................................................................................................................................
Was performed by:
Company: ................................................................................................. Address: ........................................................................................................
Name and Surname of responsible installer: ........................................................................................................................................................................
The installer hereby declares to have strictly observed all provisions of the instruction manual enclosed with the product:
Data ....................................................... Signature: ........................................................................
Place of product installation, at: .................................................................. Address: ........................................................................................................
Caution! – This declaration of conformity is not to be considered valid if all fields in this box are not duly compiled.