CBOX936
INSTALLATION AND PROGRAMMING MANUAL
43
OVIEW
CONTROLLER
RADIO RECEIVER PORT INPUT
This is an input connector for the included Nice OXI/A radio receiver (FIGURE 10-1).
ANTENNA INPUT
Attachment point for external antenna to improve Nice receiver sensitivity, if necessary (FIGURE 10-1).
USB INPUT
Type A receptacle and jumper pins (marked “F/W Jumper”) for in field software updates (FIGURE 10-1)
.
10.5 COMMUNICATION BUS
The 936 control board communication bus is described in this section.
OVIEW CONTROLLER:
•
The Oview controller is an optional programming and diagnostic tool, which plugs
directly into the 936 control board using an RJ45 network cable and is part of the Nice
“Opera” control system.
•
The Oview controller can be used in “stand-alone” mode via its front-panel keypad.
•
This unit, when matched with the optional Oview Bluetooth module (OVBT; see below)
enables remote control and management of the gate controller.
•
Remote control functions include most of the programming functions that are available
at the front panel LCD on the control board as well as software updates.
OVBT MODULE:
The optional OVBT Bluetooth module is used with the Oview controller for localized
wireless control of the gate controller.
OPTIONAL
OVBT
MODULE
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
