CBOX936
INSTALLATION AND PROGRAMMING MANUAL
39
BlueBUS
INPUT
FIGURE 10-2:
GENERAL I/O - 936 CONTROL BOARD
Refer to FIGURE 10-1 for locations (red callouts) of the five accessory power outputs, which are described below.
24VDC 0.3A POWER OUTPUT
This terminal is an internally fused (0.3A) output for powering external 24V DC accessories.
12V-a, 12V-b, and 12V-c 3A DC POWER OUTPUTS
Each of these three terminals provides 3A externally fused 12VDC power and remain powered when board is in
Standby Mode. Each terminal includes a pin for step-by-step input.
12VDC 150mA POWER OUTPUT
This terminal provides internally fused (150 mA) 12VDC power. Dedicated open and close command inputs are
available.
COMMUNICATIONS
BUS
ACCESSORY
OUTPUTS
ACCESSORY
INPUTS
POWER
INPUTS
MOTOR
OUTPUTS
10.1 ACCESSORY POWER OUTPUTS
NOTE:
In Standby Mode the voltage is inactive.
DO NOT
use to power entry/exit devices.
NOTE:
In Standby Mode the voltage is inactive.
DO NOT
use to power entry/exit devices.
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
