13
1.7 - Control box installation
Mount the control box within 4 feet
of the pivot arm. Do not mount the
control box where the person using
the push button on the side of the
box can come in contact with the
gate. Use mounting hardware capa-
ble of supporting the weight of the
control box with the backup battery
included.
1 - T5ETL-1K AND T7ETL-1K OPERATOR INSTALLATION (Continued)
Figure 15 - MOUNTED CONTROL BOX
1.8 - Learning and Limit switch adjustment
Apollo has taken great care to simplify the installation, operation and safety of this device and to
ensure longevity and reliability of the unit over time. The learning procedure consists of the follow-
ing steps shown below:
1. Install all gate accessories such as Photo-Eye’s, Sensors, Loops and other safety devices.
2. Using the MANUAL RELEASE, disengage the drive motor if this is not already accomplished
as shown in Figure 16 (Below).
Figure 16 - T5/T7 MANUAL RELEASE
