Detailed information about the accessories and complete
accessories list available at
.
Not all accessories are available on all markets.
ACTIVE COOLING ACS 310*
ACS 310 is an accessory that enables VVM 310 to control the pro-
duction of cooling.
Part no. 067 248
*The accessory requires that NIBE air/water heat pump is installed.
DOCKING KIT SCA 35
SCA 35 means that VVM 310 can be connected to thermal solar
heating.
Part no. 067 245
ENERGY MEASUREMENT KIT EMK 300
This accessory is installed externally and used to measure the
amount of energy that is supplied for the pool, hot water, heating
and cooling in the building.
Part no. 067 314
ENERGY MEASUREMENT KIT EMK 310*
This accessory is installed internally and used to measure the
amount of energy VVM 310 supplies to hot water and heating for
the building.
Part no. 067 246
*EMK 310 is included in Germany, Switzerland and Austria..
EXTRA SHUNT GROUP ECS
This accessory is used when VVM 310 is installed in houses with
two or more different heating systems that require different supply
temperatures.
ECS 41 (approx.
80-250 m²)
Part no 067 288
ECS 40 (Max 80 m²)
Part no 067 287
HUMIDITY SENSOR HTS 40
This accessory is used to show and regulate humidity and temper-
atures during both heating and cooling operation.
Part no. 067 538
EXHAUST AIR MODULE F135*
F135 is an exhaust air module specially designed to combine recov-
ery of mechanical exhaust air with an air/water heat pump. Indoor
module/control module controls F135.
Part no. 066 075
*The accessory requires that NIBE air/water heat pump is installed.
HRV UNIT ERS
This accessory is used to supply the accommodation with
energy that has been recovered from the ventilation air. The
unit ventilates the house and heats the supply air as neces-
sary.
ERS 30-400
Part no. 066 165
ERS S10-400
1
Part no. 066 163
1 A preheater may be required.
COMMUNICATION MODULE FOR SOLAR
ELECTRICITY EME 20
EME 20 is used to enable communication and control between in-
verters for solar cells from NIBE and VVM 310.
Part no. 057 188
MEASUREMENT KIT FOR SOLAR GENERATED
ELECTRICITY EME 10
EME 10 is used to optimise the use of solar generated electricity.
EME 10 measures the relevant current from the inverter via a cur-
rent transformer and can work with all inverters.
Part no. 067 541
POOL HEATING POOL 310*
POOL 310 is an accessory that enables pool heating with VVM 310.
Part no. 067 247
*The accessory requires that NIBE air/water heat pump is installed.
ROOM UNIT RMU 40
The room unit is an accessory with a built-in room sensor, which
allows the control and monitoring of VVM 310 to be carried out in
a different part of your home to where it is located.
Part no 067 064
ACCESSORY CARD AXC 40
An accessory card is required if step controlled addition (e.g. ex-
ternal electric boiler) or if shunt controlled addition (e.g.
wood/oil/gas/pellet boiler) is to be connected to VVM 310.
An accessory card is also required if for example an external circu-
lation pump is connected to VVM 310 at the same time that the
buzzer alarm is activated.
Part no. 067 060
57
Chapter 11 | Accessories
NIBE VVM 310
Accessories
