SYMBOLS IN THE DISPLAY
The following symbols can appear in the display during op-
eration.
Description
Symbol
This symbol appears by the information sign if
there is information in menu 3.1 that you should
note.
These two symbols indicate whether the com-
pressor in the outdoor module or additional heat
is blocked in VVM 310.
These can, for example, be blocked depending on
which operating mode is selected in menu 4.2, if
blocking is scheduled in menu 4.9.5 or if an alarm
has occurred that blocks one of them.
Blocking the compressor.
Blocking additional heat.
This symbol appears if periodic increase or lux
mode for the hot water is activated.
This symbol indicates whether "holiday setting" is
active in 4.7.
This symbol indicates whether VVM 310 has con-
tact with NIBE Uplink.
This symbol indicates the actual speed of the fan
if the speed has changed from the normal setting.
Accessory needed.
This symbol is visible in installations with active
solar accessories.
This symbol indicates whether pool heating is act-
ive.
Accessory needed.
This symbol indicates whether cooling is active.
Heat pump with cooling function required.
NIBE VVM 310
Chapter 7 | Control - Introduction
36
