MENU 5.11 - HEAT PUMP SETTINGS
Settings for installed heat pump can be made in the sub-
menus.
MENU 5.11.1 - EB101
Make settings specifically for the installed heat pump and
charge pump here.
MENU 5.11.1.1 - HEAT PUMP
Make settings for the installed heat pump here. To see what
settings you can make, see the installation manual for the
heat pump.
MENU 5.11.1.2 - CHARGE PUMP (GP12)
op. mode
Setting range: auto / intermittent
Default value: auto
Set the operating mode for the charge pump here.
auto: The charge pump runs according to the current oper-
ating mode for VVM 310.
intermittent: The charge pump starts and stops 20 seconds
before, and after, the compressor in the heat pump.
speed during operation
heating, hot water, pool, cooling
Setting range: auto / manual
Default value: auto
Manual setting
Setting range: 1–100 %
Default values: 70 %
min. allowed speed
Setting range: 1–100 %
Default values: 1 %
speed in wait mode
Setting range: 1–100 %
Default values: 30 %
max. allowed speed
Setting range: 80–100 %
Default values: 100 %
Set the speed at which the charge pump is to operate in the
present operating mode. Select "auto" if the speed of the
charge pump is to be regulated automatically (factory set-
ting) for optimal operation.
If "auto" is activated for heating operation, you can also
make the setting "min. allowed speed" and "max. allowed
speed", which restricts the charge pump and prevents it
from running at a lower or higher speed than the set value.
For manual operation of the charge pump, deactivate "auto"
for the current operating mode and set the value to between
1 and 100% (the previously set value for "max. allowed speed"
and "min. allowed speed" no longer applies).
Speed in wait mode (only used if "auto" has been selected
for "Operating mode") means the charge pump operates at
the set speed during the time when neither compressor
operation nor additional heat are required.
5.12 - COUNTRY
Select here the country in which the product was installed.
This allows access to country-specific settings in your
product.
Language settings can be made regardless of this selection.
Caution
This option locks after 24 hours, after restarting
the display and during program updating.
NIBE VVM 310
Chapter 8 | Control – Menus
50
