Display unit
A
B
C
D
E
F
Display
Status lamp
OK button
Back button
Control knob
Switch
INDOOR CLIMATE
MY SYSTEM
INFO
HOT WATER
VVM 310
G
USB port
DISPLAY
Instructions, settings and operational information are
shown on the display. You can easily navigate between
the different menus and options to set the comfort or
obtain the information you require.
A
STATUS LAMP
The status lamp indicates the status of the indoor mod-
ule. It:
•
lights green during normal operation.
•
lights yellow in emergency mode.
•
lights red in the event of a deployed alarm.
B
OK BUTTON
The OK button is used to:
•
confirm selections of sub menus/options/set val-
ues/page in the start guide.
C
BACK BUTTON
The back button is used to:
•
go back to the previous menu.
•
change a setting that has not been confirmed.
D
CONTROL KNOB
The control knob can be turned to the right or left. You
can:
•
scroll in menus and between options.
•
increase and decrease the values.
•
change page in multiple page instructions (for example
help text and service info).
E
SWITCH (SF1)
The switch assumes three positions:
•
On ( )
•
Standby ( )
•
Emergency mode (
)
Emergency mode must only be used in the event of a
fault on the indoor module. In this mode, the compressor
switches off and the immersion heater engages. The in-
door module display is not illuminated and the status
lamp illuminates yellow.
F
USB PORT
The USB port is hidden beneath the plastic badge with
the product name on it.
The USB port is used to update the software.
Visit
and click the "Software" tab to
download the latest software for your installation.
G
Menu system
When the door to the indoor module is opened, the menu
system’s four main menus are shown in the display as well
as certain basic information.
INDOOR CLIMATE
MY SYSTEM
INFO
HOT WATER
SERVICE
Indoor temperature - (if room sensors are
installed)
Hot water temp.
Temporary lux (if
activated)
Outdoor
temperature
Estimated amount
of hot water
Information about
operation
MENU 1 - INDOOR CLIMATE
Setting and scheduling the indoor climate. See information
in the help menu or user manual.
MENU 2 - HOT WATER
Setting and scheduling hot water production. See informa-
tion in the help menu or user manual.
MENU 3 - INFO
Display of temperature and other operating information and
access to the alarm log. See information in the help menu
or user manual.
MENU 4 - MY SYSTEM
Setting time, date, language, display, operating mode etc.
See information in the help menu or user manual.
MENU 5 - SERVICE
Advanced settings. These settings are not available to the
end user. The menu is visible when the Back button is
pressed for 7 seconds, when you are in the start menu. See
page 42.
35
Chapter 7 | Control - Introduction
NIBE VVM 310
Control - Introduction
