General
Thank you for relying on us to supply your boiler and congratulations on choosing PELLUX 100, a high quality pellet boiler
with a long service life.
In order to get the ultimate benefit from your PELLUX 100 you should read through these Installation and Maintenance
Instructions.
PELLUX 100 is a boiler intended for firing with wood pellets. The boiler is intended for houses with waterborne heating.
The controls are gathered and easily viewed in the front panel.
The serial number*
, must always be stated in all correspondence with NIBE.
069_ _ _ _ _ _ _ _ _ _ _
Installation date
Installation engineers
Setting ”Max boiler temperature” (60 ºC at delivery)
"Fuse size" setting (On delivery: 16 A)
"Heating curve offset" setting (On delivery: 10)
"Heating curve offset" setting (On delivery: -2)
Make any changes to the default settings here.
Datum__________________________ Sign___________________________
*The serial number is located on the left of the top of the housing.
NOTE
PELLUX 100 must be installed by approved and competent personnel in accordance with the manufacturer's
instructions and applicable regulations, norms and laws.
Failure to do so will void the warranty.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Rights to make any design or technical modifications are reserved.
©NIBE 2014.
PELLUX 100
2
For Home Owners
General
