Heating settings
Description
Function
Allows possibility of setting
the desired temperature in a
room.
Comfort temperature
1. Temporary - follows set
time intervals.
2. Continuous - always
maintains the set com-
fort temperature, regard-
less of the set time inter-
vals.
3. OFF -
4. Economic - ensures that
the most economic tem-
perature is maintained
in the room.
Program
Set room temperature outside
the heating period.
Economy temperature
Service settings heating
Description
Function
Max outer temperature where
the circulation pump can oper-
ate within the comfort temper-
ature range.
Comf. max pump temp.
Max outer temperature where
the circulation pump can oper-
ate within the economic tem-
perature range.
Econ. max pump temp.
Calculated minimum temper-
ature within which the heat-
ing circulation pump can
work.
Min. flow line temp.
Defines the energy source for
the heating installation.
Heat source
Calculated max temperature
for the heating installation.
Temperature max
Whole mixing valve opening
time.
Mixing time
Setting of prioritisation for hot
water for each separate cir-
cuit.
HW prioritisation
When the hot water is priorit-
ised the circulation pump for
heating is not run.
Starts the circulation pump
regardless of other settings.
Pump test
Starts the mixing valve servo
motor regardless of other set-
tings.
Mixing test
States the name of the heat-
ing circuit.
Circuit name
Flow temperature -20 °C 80 °C
Flow temperature -0 °C 80 °C
Flow temperature 10 °C 80 °C
Description
Function
Correction of the set heating
temperature in relation to the
set room temperature for each
°C.
Heating curve offset 10 °C
Manual or weather
Operating mode
60 °C
Manual flow line
no.
Room sensor
Yes/No
Flow line sensor
Yes/No
Permanent pump
For setting schedule see page 43.
PELLUX 100
32
For the Installer
Service
