Explanation
Menu
There are three different hot water controls:
Hot Water Program
Manual
1.
Time
- heats the hot water in relation to the set time intervals.
2.
Manual
- ensures that the hot water always maintains a comfortable temperature
regardless of the set time intervals.
3.
Switch off
- no hot water produced.
NOTE
This is an accessory and only works if connected and all settings made in the
control computer.
You can see the room temperature in room number 1 (large digits) and the set temperatures
(small digits) here.
20.6
Central Heating Temperature
To change the set room temperature, press Enter.
Heat regulation for:
Heating Program
Time
1.
Time
- heats the section in relation to the set time intervals.
2.
Permanent
- ensures that the section always maintains a comfortable temperature
regardless of the set time intervals.
3.
Switch off
- no heating produced.
4.
Economy
- runs according to the set values for optimum economy.
Here you see if the burner has permission to operate.
NO
Burner Work
No
If the burner does not have permission to operate the control computer monitors the
heating system but does not start the burner even if the boiler/heating system temperature
falls below the set values.
Manual start of fuel feed from the pellet hopper.
NO
FEED FUEL
No
After filling an empty pellet hopper this function must be used until the fuel starts to come
out of the fire proof hose from the pellet auger.
PELLUX 100
8
For Home Owners
Front panel
