Nibe AMS 10-16 Installation And Maintenance Instructions Manual Download Page 11

Page: 11 / 104

Readjusting the default settings

If the required room temperature is not obtained, readjust-
ment may be necessary.

Cold weather conditions

႑

When the room temperature is too low, the “Heating
curve” value is increased in menu 2.1.2 by one increment.

႑

When the room temperature is too high, the “Heating
curve” value is decreased in menu 2.1.2 by one incre-
ment.

Warm weather conditions

႑

If the room temperature is low, increase the “Heating
curve offset” setting by one step clockwise.

႑

If the room temperature is high, reduce the “Heating
curve offset” setting by one step anti-clockwise.

NIBE™ SPLIT

For Home Owners

Comfort setting heating

Summary of Contents for AMS 10-16









































































































Search results

Summary of Contents for AMS 10-16

Reviews:

Related manuals for AMS 10-16

Brands by name

Popular brands

Nibe AMS 10-16, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for AMS 10-16

Reviews:

Related manuals for AMS 10-16

Brands by name

Popular brands