Nibe AMB 30, Installer Manual

Page: 34 / 52

Hybrid
This menu is only shown if hybrid operation is selected
in System type.
OK OK Systemtype
Settings
Testmanually
Service
Fan
Defrost
Stopairmode
Hybrid
Language
Settings
Hybridmode
Aironly
Maxchargecoll. 4K
15°C
10°C
Hybrid
Description Sub menu
Hybrid
Here you can set the difference
between the temperature sensors
BT28 (ambient) and BT26 (brine in
to the heat pump) at which the
rock/ground collector and outdoor
air are to be used together. Hybrid mode
Both energy sources are used when
the temperature difference exceeds
the set value. It returns to
rock/ground collector operation
when the temperature differential
falls two degrees below the set
value.
Setting range: 1 – 9 K
Preset value: 4 K
Here you select at what ambient
temperature (BT28) AMB 30 must
shift from/to exclusively outdoor air
during hybrid operation. Air only
Only outdoor air is used when the
set temperature is exceeded and
starts to be combined with the set
value.
Setting range: -5 – 20 °C
Preset value: 12 °C
Here you select at what temperature
brine in to the heat pump (BT26) the
outdoor air must start/stop using
outdoor air during hybrid operation. Max charge coll.
Rock/ground collector is used when
the set temperature is exceeded and
is only used together with outdoor
air below the set value.
Setting range: 1 – 40 °C
Preset value: 10 °C
Language
OK OK Systemtype
Settings
Testmanually
Service
Fan
Defrost
Stopairmode
Hybrid
Language
Settings
Svenska
English
Deutch
Language
Description Sub menu
Language
Choose the language that you want
the menus to be displayed in here. Svenska
English
Deutch
AMB 30 Chapter 8 | Control - Menus 32