Nibe AMB 30, Installer Manual

Page: 29 / 52

The control unit
MR
OK
MR
OK
Temperatures
AMBno1
BT28
OK
Ground
5 °C/3 °C
Operationmode
BT21
BT27
BT26
3.0°C
13.0°C
3.8°C
5.0°C
Indoors (usually located near F1345) you will find the
control unit that is used to communicate with AMB 30.
Here you have for example :
႑
Operating status of AMB 30.
႑
Make settings specific to the installation.
႑
Receive information about settings and alarms.
The display mode shows the temperatures that are
read off from the different temperature sensors that
are connected to AMB 30.
Use the [-] and [+] buttons to scroll through the differ-
ent units (if more than one is connected).
In the previous example the control unit shows that
the brine temperature in to the heat pump (BT26) is 5
°C and the outdoor temperature (BT28) is 3 °C.
27 Chapter 7 | Control - Introduction AMB 30
7 Control - Introduction