7
6
Nova300 - ADSL wireless modem router
Nova300 - ADSL wireless modem router
FDM technology:
enables telephoning, faxing and surfing activities to proceed simultaneously without
mutual interference.
Other advanced features:
IPv6, DDNS, virtual server, DMZ, port triggering, IP filter, MAC filter and
UPnP, etc.
Nexxt Solutions Setup:
Wizard for easy and fast installation and configuration.
Nexxt Solutions Green
: Use hardware Power On/Off and software Wi-Fi On/Off buttons to turn on
and off power and Wi-Fi to save energy when not in use.
•
•
•
•
Wireless Modem Router
Phone cable
Ethernet cable
ADSL2+ filter
Quick install guide
Power adapter
Resource CD
•
•
•
•
•
•
•
Package contents
Your box should contain the following items:
If any of the parts are incorrect, missing, or damaged, keep the carton, including the original packing
materials and contact your Nexxt Solutions dealer for immediate replacement.
•
ON/OFF: Power button to turn the router on or off.
Note
:
Please use the included power adapter. Use of a power adapter with different voltage rating
may damage the device.
Chapter 2. Hardware installation
If you have not already set up your new router using the Quick Install Guide that comes in the box, this
chapter walks you through the hardware installation. To set up your Internet connection, see Chapter 3
Quick Internet Setup.
Front panel
The LEDs on the device are described below:
LED
SYS
WLAN
ADSL
LAN 1/2/3/4
Status
Solid
Off
Blinking
Solid/Off
Blinking
Off
Solid
Slow blink
Fast blink
Solid
Off
Blinking
Solid
Solid
Blinking
Off
Solid
Off
Description
Power is supplied to the device.
Power is not supplied to the device.
System is functioning correctly.
System is functioning incorrectly.
Transferring data
Wireless is disabled.
Wireless is enabled.
Physical connection failure.
Synchronizing...
ADSL connection is established.
No connection established.
Transferring data
Connection is established.
Client connected successfully.
The WPS LED starts blinking if you pressed the WPS
button on the device or interface.
If there is no wireless clients connected, the WPS LED
turns off after blinking for 2 minutes.
Connection is successfully established on the USB
port.
Connection is not established on the USB port.
Back panel
Power
WPS
USB