Nexxt NOVA300 AML02304U1 User Manual Download Page 49

Page: 49 / 75

Nova300 - ADSL wireless modem router

Tip

If you are unsure about the ADSL parameters, please apply the factory default settings. Wrong

configurations may fail your Internet access.

4.2.9 DSL

This screen provides multiple ASDL modulation modes to meet diversified environments. You can also

select phone line pair and capability.
DSL parameter configurations must be supported by ISP to take effect. Actual parameters (see Statis-

tics-xDSL) resulted from the negotiation between your router and ISP. Wrong configurations may fail your

Internet access.

The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP

or our technical staff when your router fails to negotiate with ISP in DSL (ATM) mode.Usually, this failure

can be identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking

light.

4.2.10 UPnP

UPnP (Universal Plug and Play) allows Windows based systems to configure the device for various Inter-

net applications automatically. UPnP devices can automatically discover the services from other registe-

red UPnP devices on the network. If you use applications such as multiplayer gaming, peer-to-peer

connections, or real-time communications, such as instant messaging or remote assistance (a feature in

Windows XP), you should enable UPnP.

Check the checkbox next to a modulation to enable it and then click Apply/Save.

Summary of Contents for NOVA300 AML02304U1












































































Search results

Summary of Contents for NOVA300 AML02304U1

Reviews:

Related manuals for NOVA300 AML02304U1

Brands by name

Popular brands

Nexxt NOVA300 AML02304U1, User Manual

Search results

Summary of Contents for NOVA300 AML02304U1

Reviews:

Related manuals for NOVA300 AML02304U1

Brands by name

Popular brands