9
8
Nova300 - ADSL wireless modem router
Nova300 - ADSL wireless modem router
WPS/RESET: Press it for 1-3 seconds to enable WPS connection or 7 seconds to restore all configu-
rations to factory defaults.
LAN: Ethernet RJ-45 LAN ports to cable the device to the local network devices such as
computers.
DSL: RJ-11 Asynchronous DSL (ADSL) port for connecting the device to a DSL line. Follow the diagram
below to install the device.
Enter
admin
in both the login User Name and Password boxes if you first time access the router
and then click the
Login
button to enter the screen below.
3.
•
•
•
Power
Power
Adapter
Shared USB
storage or
printer port
USB
Line
RJ-11
RJ-45
A/V
TV
TV receiver
Phone
Jack
Cable/xDSL
Modem
Chapter 3. Quick internet setup
3.1 Log in to Web Manager
Using the browser
This chapter instructs you to quickly set up your Internet connection.
The Quick Internet Setup applies only to ADSL Uplink mode. If you are not directly connecting to the ADSL
line via a phone cable, please click the Advanced button on the home page and then select Advanced
Setup -> Layer2 Interface -> ETH Interface. For more information, see
To set up the ETH interface
and
To setup WAN Service for ETH Interface
.
You can log in to the modem router’s web manager using a web browser.
3.2 Internet setup
a.
Select your country.
b.
Select your ISP.
c.
VPI and VCI fields will be populated automatically if you select a correct country and ISP.
d.
Select your Internet connection type.
1. Set your PC to Obtain an IP address automatically. For more information, see
Appendix 1.
Configure Your PC.
2. Launch a web browser and enter
192.168.1.1
to display the login window.
Tip
:
If you changed the login user name and password and forget them, press the Reset button on
the device and then enter the default settings:
admin.