Nexxt NOVA300 AML02304U1 User Manual Download Page 12

Page: 12 / 75

Nova300 - ADSL wireless modem router

Tip

For PPPoE, IPoE, and Bridging Internet connection types, you must first select EoA on the ATM

Interface Screen, for more information, see

To set up the ATM interface.

PPP User Name:

This is for logging in to your ISP. If you cannot locate this information, ask your ISP

to provide it.

PPP Password:

This is for logging in to your ISP. If you cannot locate this information, ask your ISP to

provide it.

PPPoE Service Name:

This information is provided by your ISP. Only enter it if instructed by your ISP.

Authentication Method:

This is used by ISP to authenticate the client that attempts to connect. If you

are not sure, consult your ISP or select Auto.

Clone MAC:

Clicking this button copies the MAC address of your PC to the router. Many broadband

ISPs restrict access by allowing traffic only from the MAC address of your broadband modem, but

some ISPs additionally register the MAC address of the network interface card in your computer when

your account is first opened. They then accept traffic only from the MAC address of that computer. If

so, configure your router to “clone” the MAC address from the authorized computer.

Dial on demand:

Connect to ISP only when there is traffic transmission. This saves your broadband

Internet service bill.

PPP IP extension:

If enabled, all the IP addresses in outgoing packets including management packets

on the WAN port will be changed to the device's WAN IP address. Only change the default settings if

necessary.

Enable PPP Debug Mode:

Only enable this feature if supported by your ISP.

Bridge PPPoE Frames Between WAN and Local Ports:

If enabled, PPPoE dialup frame from LAN

side will directly egress the WAN port without modification.

Multicast Proxy:

If enabled, the router will use multicast proxy.

•

PPP over Ethernet (PPPoE)

If you have selected the

EoA

from the

ATM Interface

screen in

Layer2 Interface

, you will see the screen

below when you click the

WAN Service

tab, select the configured interface and click

Next

Select PPPoE.

Edit the

Enter Service Description

. This field is optional. We recommend that you keep

the default.

Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).

Click Next.

Note

If you select IPv6 or IPv4 & IPv6 (dual stack), skip to

IPv6

Summary of Contents for NOVA300 AML02304U1












































































Search results

Summary of Contents for NOVA300 AML02304U1

Reviews:

Related manuals for NOVA300 AML02304U1

Brands by name

Popular brands

Nexxt NOVA300 AML02304U1, User Manual

Search results

Summary of Contents for NOVA300 AML02304U1

Reviews:

Related manuals for NOVA300 AML02304U1

Brands by name

Popular brands