3
Safety precautions to avoid injury
The safety measures designed by this equipment prevent operators and maintenance personnel from being
harmed during the operation of the machine.
The most important thing is operator or maintenance personnel must configure specific safety precautions to
avoid injury. In the same time, the equipment also needs specific safety precautions.
In the best condition, the equipment must be in a clean, dust-free environment. Do not operate the device in a
wet or hazardous environment.
Before operating the device and during the operation of the device, pay attention to the following safety
precautions:
1. Always wear approved eye protection when operating the equipment.
2. Always ground the power supply properly to prevent electric shock.
3. Always maintain proper power connection to prevent danger.
4. When performing equipment maintenance, make sure to turn off the power switch and disconnect the power
cord from the power supply always.
5. Do not wear loose clothing or jewelry that may get caught in moving parts of the device.
6. Do not place your hands on the bottom of the press head while the equipment is in operation.
7. Do not change, modify or improperly use the equipment.
8. Do not use the device incorrectly. This device is used to press the connector into the circuit board. It will
cause people to get hurt in an attempt to use this device for stamping, squeezing, bending, or rolling other
products.
9. Do not use the optional work light and laser positioning marker to irradiate eyes.
