8. Connecting memory cards and USB external drives
7. Basic Functions
11
Connecting memory cards and USB external drives
Basic Functions
10
7.4. The LCD Display
①
Remaining capacity of the external hard drive connected to USB #1 and USB #2
When the power is turned on, it automatically checks the remaining capacity of the USB
external drive. For information on the external hard disk, refer to ‘10.3 USB External Drive
Management’
②
External power connection indication: It is displayed as [E-Icon] when operating with power
adapter or V-mount battery, and [U-Icon] when operating with USB power
③
Current status : Indicates the current operation status in the center of the screen
④
Buttons: At the bottom of the screen, it shows the commands that can be executed
①
②
③
④
NCB20 can backup by connecting memory cards (SDHC / SDXC) and USB external drives. Refer to
‘9. Mode Selection’. The NCB20 supports memory cards formatted using FAT32/exFAT/HFS+/UDF.
For USB external drives, NCB20 only supports exFAT formatted drives.
8.1. Connecting The Memory Card
The SD card / MicroSD card can be used by inserting multiple SD cards at the same time into eight slots
built into the main unit. However, you can not use an SD card and a MicroSD card at same time.
Correct insertion
Incorrect insertion
● Forcibly inserting the memory card or inserting it in the other
direction may damage the connecting pin and cause the product
to malfunction.
When operating with USB power, only Slot1 and Slot 2 will
operate because of USB power limitations.
Caution
