Installation instructions for the MANU automatic out of pool safety cover - 6/12
6
3. Fitting the roller
3.1
Fitting the shaft onto the posts
3.1.1 Fig.
6
Lubricate the contact parts using a silicone-based
grease.
3.1.2 Insert the drive shaft of the axis into the geared post.
3.1.3 Fit the blocking washer.
3.1.4 Fig.
7
Insert the gear shaft of the axis into the housing, fi t
the pinning screw and bolt.
3.1.5 Fig.
8
Make sure that the posts are placed against the axis.
3.2
Placing the roller on the pool
3.2.1 Fig.
9
If the posts cannot be placed tightly, install a
blocking ring which should be ordered from us.
3.2.2 Fig.
10
Check that the axis and the posts are level
(horizontally and squared) and that the rolling tube
is centred on the line formed by 1 and 3 (see Fig. 3).
Fig. 8
A
0 mm
Fig. 9
Fig.6
Fig.7
Fig. 10
