9/12 - Installation instructions for the MANU automatic out of pool safety cover
9
4.3 Adjustment of the number of blades
Fig. 19
Only keep the blades needed to cover the entire surface
of the water when joined in the pool, the eventual extra
blades should be stored away.
4.4 Controlling the fi t
Fig. 20
Place the cover against a length of the pool. Check
that there is a gap greater than 2.5 cm between the
ends of the wings and the sides of the pool (needed for
operation) and less than 7 cm (otherwise the cover is
no longer compliant). 10, 20, 25 and 30 mm wings are
available on order.
4.5 Placing the stair blades
Fig. 21
Centre the stair cover in its housing and assemble it to
the rest of the cover by making a notch in the double
male hook on either side of the stairs in order to leave
the space for the cap on the base stair blade.
Fig. 19
Fig. 20
2.5cm < x < 7cm
2.5 cm < x < 7 cm
Fig. 21