background image

Installation instructions for the MANU automatic out of pool safety cover - 8/12

8

3.4  Cutting the pool sides 

Fig. 15 and 16

Cut the ends of the pool sides (if they overhang the 
pool) for a length "x" depending on the length of the 
pool "L" in order to allow the blades to move from the 
axis to the pool.

4. Assembling the blades

Special care needs to be taken when handling the 
blades. Shearing can cause irreparable damage to 
the caps. This is why they must not be assembled by 
threading

4.1  Placing the blades on the water

Fig. 17

4.1.1  Transfer the blades directly from the container to the 

pool water avoiding all mechanical contacts.

4.1.2  Place the packets of blades directly onto the water, 

curved side towards the sky and the double male 
hook on the farthest side from the roller. Place the 
specifi c groups of blades (the group fi tted  with 
straps to hook to the axis on the roller side, the 
group fi tted with the other anti-lift mechanisms
on the side furthest from the roller, the blades for 
the stairs).

4.2  Assembling the blades

Fig. 18

4.2.1  Assemble the blades by clipping them together by 

inserting the double male hook into the female part 
of the preceding blade and then by pushing the 
blades up into a "V" shape towards the sky.

4.2.2  Make oscillating movements in order to cause the 

fi tting along the whole length of the blade.

Fig. 16

x

Fig. 15

L

4

5

6

7

8

9

10

11

12

13

14

15

X

290 300 310 320 330 340 350 360 370 380 390 400

x

x

Fig. 17

Fig. 18

Summary of Contents for ABRIBLUE MANU





















Reviews: