11/12 - Installation instructions for the MANU automatic out of pool safety cover
11
4.7.2 Fig. 26 & 27
Option for fi xture to the pool edge, fi x the bracket
support into the concrete belt, under the pool side,
applying the bracket against the pool side.
4.7.3 Make a clipping and unclipping test on all the
mechanisms which remain unlocked in order to
carry out the run stop adjustments.
5. Maintenance in the
event of a malfunction
Greasing the gears
The following list has been drawn up in order to help
diagnose and correct malfunctions that may occur
during installation. This guide is exclusively for the
professional authorised to install the cover in order
to maintain the validity of the warranty. If, after
having followed these instructions, the cause of the
malfunction has not been found, the professional must
contact the cover retailer or manufacturer.
5.7.1 Remove the gears from the post.
5.7.2 Open the gear mechanism.
5.7.3 Clean each part, remove all the used grease.
5.7.4 Grease the contact parts again.
5.7.5 Remount the gear mechanism and reinstall it in the
post.
5.7.6 For correct operation, this maintenance should be
carried out once per year.
Fig. 26
Fig. 27
