24
7 > WATER CONTROL IN THE QUICK COUPLING
The water spray is at maximum when the points are at the same level; the water spray can be controlled until it stops when the control
part is turned to the right side (Fig. 2).
8 > LUBRICATION
Provide spray lubricant or other standard spray oil after each use and/or before autoclaving.
Remove the handpiece from the dental unit tube and lubricate as follows (Fig. 3):
1) Attach a spray nozzle to the lubricant outlet.
2) Remove the test burr from the cartridge, then point the single spray nozzle at the cartridge chuck.
Water is at the maximum when these two points are at the same level.
Fig 2.
Summary of Contents for Rose 202-M4 2SH
