1. A combination of pipe fittings must be used to connect the grill
to the existing gas line.
§
The 10 ft (3.0 m) PVC flexible gas supply hose design
certified by CSA must be used.
§
Pipe-joint compounds suitable for use with Natural gas
must be used. Do not use Teflon
®
+ tape.
§
There must be a certified manual shut-off valve in the gas
supply line near the grill for easy access.
2. Connect the brass connector on one end of the 10 ft (3.0 m)
PVC flexible gas supply hose to the Natural gas pressure
regulator.
3. Connect the quick connector on the other end of the
10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill cart
with the two screws that are pre-assembled on the
regulator.
Conversion from LP Gas to
Natural Gas
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from the grill cart.
5. Use an adjustable wrench to remove the LP regulator from the
manifold.
Installation of the regulator
Make Gas Connection
† ®
Teflon is a registered trademark of E.I. Du Pont De Nemours
and Company.
A. Manifold
B. Left side panel
C.10 ft. (3.0 m) PVC gas hose
D. Natural gas pressure regulator/hose assembly
A
C
D
B
17
