32
NewTom GO 2D/3D
EN
2D/3D OPT E.L. CALIBRATION MANUAL
Evaluate phantom position; if necessary, correct the
side position to reach a position similar to the one
shown in the figure.
Press CTRL, click the image with the left mouse but-
ton and move it (keeping both keys pressed). Once
the desired position has been reached, release mou-
se button and wait for the Software to warn you to
release also the CTRL button. Once finished, press
the rays button when prompted; the system acquires
a new scout to evaluate the new position.
To confirm the correct position, press “Next”,
then press “X-ray Flash”.
The front scout is acquired, no corrections are nee-
ded.
Press “Next”, then press “Start”.
Press the rays button when prompted. The system
