18
NewTom GO 2D/3D
EN
2D/3D OPT E.L. CALIBRATION MANUAL
The machine will turn automatically until it has rea-
ched the right position; assess the alignment betwe-
en the three laser beams (midsagittal, canine and
Frankfurt plane) and the references on the template.
If one or more lasers are not aligned, use a gripper to
loosen the springs of the corresponding supports and
adjust them manually; the Frankfurt plane laser and
the canine laser are inside the generator block.
The midsagittal laser is under the mirror.
At the end, press “Exit”.
