Modem
Reference Manual for EL470 IP Satellite Modem
Command
MoFrameType
DVB-S2 FEC-Frame
type
FEC-Frame type
Location
/Modem/Control/Modulation/Main
Used as
variable of
Command(s)
Page
Only valid for DVB-S2 modes and XPE modes.
Description
Configuration of the DVB-S2 FEC-frame type. Two FEC-frame types are
defined:
•
Normal
FEC-frames of 64800 bits or 8100 bytes.
•
Short
FEC-frames of 16200 bits or 2025 bytes.This command
configures if short or normal length frames need to be created by the
encapsulator.Remark: Short frames introduce more overhead but
give a shorter encapsulation delay. Short frames are 4 times shorter
then normal frames.
RMCP
Command
ACF
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01ModulatorEntry
Command
ntcDevsMod01MoFrameType
OID
1.3.6.1.4.1.5835.3.1.3.1.69.1.1
Values
Factory Default
short
Enumeration
Value
Short
Normal
0
1
Command
MoInpRate
Interface bitrate
Interface bitrate
Location
/Modem/Control/Modulation/Main
Not applicable for Air (TS) (multistream) processing mode.
Description
Configuration of the interface bitrate. This command configures the
(de)modulator input bitrate at the baseband interface. The actual range
depends on the installed hardware and software capability of the device.
RMCP
Command
TRr
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01ModulatorEntry
Command
ntcDevsMod01MoInpRate
OID
1.3.6.1.4.1.5835.3.1.3.1.14.1.1
Values
GUI Unit
Mbps
Cmd Unit
Factory Default (CU)
bps
8.294.118
Expert Range (CU)
55000 .. 110000000
version 3.1
74
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
