Modem
Reference Manual for EL470 IP Satellite Modem
Command
DmIntRate
Interface rate
Interface rate
Location
/Modem/Control/Demodulation
Description
Configuration of the nominal interface rate. When automatic detection
(ACM or auto-CCM) of FEC and modulation mode is enabled, the operator
can only enter a specific symbol rate while the interface rate will indicate
auto. In DVB-DSNG mode, this parameter is always manually adaptable.
RMCP
Command
RRr
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01DemodulatorEntry
Command
ntcDevsMod01DmIntRate
OID
1.3.6.1.4.1.5835.3.1.13.1.14.1.1
Values
GUI Unit
Mbps
Cmd Unit
Factory Default (CU)
bps
33.000000
Expert Range (CU)
1290000 ..
110000000
Command
DmSynRate
Symbol rate
Symbol rate
Location
/Modem/Control/Demodulation
Description
Configuration of the nominal symbol rate. The actual possible range
depends on the hardware installed and can be limited by a software
capability key.
RMCP
Command
RRs
Access
Normal user : RW
Expert user : RW
SNMP
Table
ntcDevsMod01DemodulatorEntry
Command
ntcDevsMod01DmSynRate
OID
1.3.6.1.4.1.5835.3.1.13.1.25.1.1
Values
GUI Unit
Mbaud
Cmd Unit
Factory Default (CU)
baud
27.500000
Expert Range (CU)
-1e+38 .. 1e+38
Command
DmAcqRan
Acquisition range (ptp) Acquisition range (p
Location
/Modem/Control/Demodulation
Description
Configuration of the range for the carrier acquisition sweep (peak-to-peak).
A larger acquisition range will allow locking more easily on an unstable
frequency but will also increase demodulator synchronisation time.
RMCP
Command
RDr
Access
Normal user : no
access
Expert user : RW
SNMP
Table
ntcDevsMod01DemodulatorEntry
Command
ntcDevsMod01DmAcqRan
OID
1.3.6.1.4.1.5835.3.1.13.1.3.1.1
Values
GUI Unit
KHz
Cmd Unit
Factory Default (CU)
Hz
1.000.000
Expert Range (CU)
50000 ,,,,,, 7500000
version 3.1
101
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
