Modem
Reference Manual for EL470 IP Satellite Modem
Command
IfEnableL2routing
L2 routing
L2 routing
SNMP
Table
ntcDevsMod01InterfaceEntry
Command
ntcDevsMod01IfEnableL2routing
OID
1.3.6.1.4.1.5835.3.1.4.1.230.1.1
Values
Factory Default
enabled
Enumeration
Value
Disabled
Enabled
0
1
Command
IfPromiscFlag
promiscuous mode
promiscuous mode
Location
/Modem/Control/Interfaces/Ethernet/IP encap-decap
Description
Readout of the promiscuous flag that indicates if the Ethernet interface is
receiving packets for all MAC addresses (=
promiscuous
) or only for its
own MAC address (=
non-promiscuous
).
RMCP
Command
prm
Access
Normal user : no access
Expert user : R
SNMP
Table
ntcDevsMod01InterfaceEntry
Command
ntcDevsMod01IfPromiscFlag
OID
1.3.6.1.4.1.5835.3.1.4.1.197.1.1
Values
Factory Default
nonPromiscuous
Enumeration
Value
Non-promiscuous
Promiscuous
0
1
Command
IfForcePromiscuous
Force promiscuous
Force promiscuous
Location
/Modem/Control/Interfaces/Ethernet/IP encap-decap
Description
Configuration to force packet reception from the Ethernet interface in
promiscuous mode which means accepting all MAC addresses from the
Ethernet physical interface. Normally, the system will decide automatically
whether the Ethernet physical interface should be in promiscuous mode or
not. Forcing the physical interface into promiscuous mode is useful for
troubleshooting, because it allows you to capture all packets that are
received on the wire.
RMCP
Command
fpr
Access
Normal user : no access
Expert user : RW
SNMP
Table
ntcDevsMod01InterfaceEntry
Command
ntcDevsMod01IfForcePromiscuous
OID
1.3.6.1.4.1.5835.3.1.4.1.192.1.1
Values
Factory Default
automatic
Enumeration
Value
Automatic
Force promiscuous
0
1
version 3.1
55
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
