NewMar King Aire 2015, Manual

Page: 30 / 238

Headlamps and Parking Brake
To the left of the instrument cluster is a small panel that houses the headlamp controls and the parking
brake switch.
1.
The left switch turns the headlamps and parking / clearance lamps on and off. It also rotates to turn the
driver’s side map light off and on.
2.
The center switch controls the brightness of the dash instrumentation lighting.
3.
The right knob engages and disengages the parking brake.
Power Seat Operation
The driver and passenger front seats are mounted on power pedestals that offer a wide range of
adjustments. The center “joystick” switch moves the seat horizontally and vertically. The front rocker
switch tilts the front of the seat up and down. The first rocker switch aft of the “joystick” switch controls
the tilt of the rear of the seat base.
Additional switches control the recline angle of the seat back, and the inflatable “lumbar” support in the
lower back region of the seat back. A release lever allows the seats to rotate on the pedestal, allowing the
seats to face into the living area.
Rear Vision System
Your King Aire is equipped with a standard Rear Vision system. This closed circuit television system
features a camera mounted on the top of the rear cap that is connected to the Sony in-dash video screen.
This system comes on automatically when you put the transmission in reverse to allow you to see behind
your unit when backing. Additionally, it can be manually turned on in transit to allow you to monitor your
towed vehicle or for additional assistance in passing maneuvers.
Side View Cameras
Your unit is equipped with “side view” cameras. These cameras are tied into the rear vision system and
are activated by the turn signals. When a turn signal is activated, the monitor will switch to display that
side of the unit. If the rear vision monitor is turned on manually, you can toggle through the cameras by
1
2
3
2015 Newmar King Aire Diesel Bus 28