NewMar King Aire 2015, Manual

Page: 214 / 238

This screen is password protected to allow Qualified Service Technicians access to make changes to the
control settings. Changing these control settings to improper values can adversely affect the operation of the
control system and may cause damage to the coach.
Restore Default Settings
With 'RESTORE DEFAULT SETTINGS' selected on the Configuration screen, press the Control Knob on the keypad
to return the unit to its factor defaults.
Never reset any of the system components to factory defaults. The modules should be programmed correctly
by the manufacturer. Resetting any of the SilverLeaf components may cause physical damage to various
systems on the coach, which could, in turn, cause physical injury.
When in doubt, contact your Service Representative. They can guide you through the best solution for troubleshooting,
and, if necessary, replacing the modules at a Newmar Certified Service Center.
Reboot
With 'REBOOT' selected on the Configuration screen, press the Control Knob on the keypad to restart the Driver
Display.
Installer Options
This option is for installers. With 'INSTALLER OPTIONS' selected on the Configuration screen, press the Control Knob
on the keypad to access certain advanced options, which are usually only needed during installation.
This screen is password protected to allow Qualified Service Technicians access to make changes to the
control settings. Changing these control settings to improper values can adversely affect the operation of the
control system and may cause damage to the coach.
© 2014 Copyright Newmar Corporation. All rights reserved.
p.10