nlscan.com
Page 142
Message Interception & Pack
Introduction
Barcode message could divide information into different sections, such as product ID, manufacture
ID, and so on. They are important overall. However, at certain situations, some of them are not
of interest. This is where message interception comes in. Message interception feature allows
transmission of selected section(s). Message intercept only applies to
“
raw
”
barcode messages.
The sequence of a read to transmit without message intercept is: Read a
“
raw
”
barcode
—
> Add
pre
fi
x
—
> Append suf
fi
x
—
> Append terminal
—
> Transmit to Host.
The sequence of a read to transmit with message intercept is: Read a
“
raw
”
barcode
—
>
Intercept Message
—
> Add pre
fi
x
—
> Append suf
fi
x
—
> Append terminal
—
> transmit to Host.
A special programming, pack, can insert barcode messages into a certain message format.
Then the processing sequence is: Read to obtain barcode message
—
> Intercept
—
> Add pre
fi
x
—
>
Append suf
fi
x
—
> Pack
—
> Append terminal
—
>Transmit.
