Version
Description
Date
V1.0
Support as from FM420
fi
rmware Version 3.06.021 and higher.
20100825
V1.1.1
Modi
fi
y the introduction for USB Interface; change the default status of
Terminal to "off "(disable)
；
update the "Figure 1. FM420 Top View" .
20110712
V1.1.2
Renew "ASCII Function Key Mapping Table
”
of "USB HID-KBW" and
correct the setting code of "Enable Reading All 2D.
20110719
V1.1.3
Add an "ASCII Table" in the
Appendix.
20110822
V1.1.4
Add the "
Dimensions of the FM420-MS-3X
" section.
20140807
V2.0
Updates:
1. Add the "Query Firmware Version", "USB HID-KBW Fast Mode" and
"USB HID-KBW Speed" features and modify the "Emulate Numeric Keypad"
feature.
2. Add the "UPC-E/UPC-A Preamble Character", "Convert UPC-E to UPC-A",
"Convert Code 39 to Code 32 (Italian Pharma Code)", "Code 32 Pre
fi
x",
"Select Message Length" for UCC/EAN-128 and "Micro QR" features and one
symbology of ISSN.
3. Modify the "Pre
fi
x Sequences" feature.
Note: You must have
fi
rmware version V3.06.053 or higher to use the new
features above.
20150130
V2.1.1
Modify Chapter Batch Programming.
20150618
V2.1.2
Add the "Enable/Disable PDF417 ECI Output", "Enable/Disable QR ECI
Output", "Enable/Disable Aztec ECI Output" and "Enable/Disable Data Matrix
ECI Output" features.
Note: You must have
fi
rmware version V3.06.064 or higher to use the new
features above.
20160129
V2.1.3
Add the "1D Twin Code" feature.
20160616
V2.1.4
Add a new chapter - Data Formatter.
Note: You must have
fi
rmware version V3.06.071 or higher to use the new
feature above.
20160706
V2.1.5
Add the "Code Page", "PDF417/QR/DataMatrix/Aztec Character Encoding"
and "QR Inverse" features.
Note: You must have
fi
rmware version V3.06.076 or later to use the new
feature above.
20170115
V2.1.6
Add the EAN-13 Beginning with 414/419 Addenda Code Required, Transmit
Code 32 Check Digit, Transmit Code 32 Start/Stop Character and Data
Packing Format 2 features. Add the BA (Replace a string with another) and EF
(Insert a delay) commands.
Note: You must have
fi
rmware version V3.06.078 or later to use the new
features above.
20170320
V2.1.7
Add the B5 (Insert key strokes) command.
Note: You must have
fi
rmware version V3.06.080 or later to use the new
feature above.
20170629
Revisions
